WIM SUPERFLEX S1 highly flexible adhesive for tiles – 25kg
£25.33 inc VAT
WIM manufacturer
on deformable substrates (class S1)
very high flexibility
with increased grip
for terraces, balconies and facades
for large format tiles
for sticking “plate to plate”
for underfloor heating
the possibility of gluing tiles “from above”
for OSB
on plasterboard
layer thickness up to 10 mm
frostproof, waterproof
Description
DEFORMABLE HIGH FLEXIBLE ADHESIVE MORTAR WITH VERY HIGH PARAMETERS
Deformable, highly elastic adhesive mortar for fixing ceramic, porcelain and clinker tiles of any format and absorbability, exposed to extremely difficult conditions of use and deformation, indoors and outdoors. It can be used for gluing tiles on difficult substrates such as plasterboard walls, OSB boards, old tiles, terrazzo, floors with underfloor heating, properly made and dried waterproofing coatings in shower cabins and especially on terraces, balconies and swimming pools. It is also suitable for laying natural stone, insensitive to moisture and discoloration.
Side tile Tooth height Consumption (kg / m²)
up to 10 cm 4 mm 1.6-2.0
20-25 cm 6-8 mm 3.0-4.0
over 30 cm 8-12 mm 4.0-6.0
Related products
-
Ceresit CT74 silicone render 1.5mm DOT – 25kg
£95.45 inc VAT Add to cartDecorative thin-layer plaster for indoor and outdoor applications
Properties
- highly self-cleaning
- highly resistant to dirt
- hydrophobic
- very low water absorption and high vapour permeability
- high durability
- high elasticity and impact resistance
- highly resistant to weather conditions
- high stability of colour
- BioProtect formula – resistant to fungi, algae and mould
- possibility of machine application
- available in full palette of Ceresit Colours of Nature®
-
-
Larsen Pro Flexible Standard Set+ – 20kg grey
Professional Flexible Standard Set+ is a specially-formulated, fully flexible, S1 rated, non-slip, standard-setting, cement-based adhesive with extended open time.£19.91 inc VAT Add to cart -
Ceresit CT17 deep penetrating primer – 10L
Manufacturer Ceresit£48.36 inc VAT Add to cart
- consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate)
- it strengthens the surface
- reduces the absorbability of the substrate
- improves adhesion to the ground
- permeable
- makes it easier to apply subsequent layers, eg glues, putties, floors, paints
