Ceresit CT16 priming preparation – 10L – 15kg
£56.18 inc VAT
Manufacturer Ceresit
- consumption from 0.2 to 0.35 l / m 2 depending on the evenness and absorbability of the substrate
- makes plastering easier
- increases the adhesion to the ground
- waterproof
- high covering power
- for painting with a roller or brush
- ready to use
Description
Ceresit CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the armoured layers within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) and traditional plasters. The paint CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Priming the substrate with the paint CT 16 considerably decreases its absorption, which prevents from too fast drying of the applied products. The fi ne aggregates included in CT 16 make the primed surfaces rough and scratch resistant. As the surface is expanded, it increases the adhesion of the plasters, putties and paints. This product has strong coating properties and makes the substrate effi ciently homogenous, thus preventing from any formation of stains on the coloured acrylic, mineral and silicone plasters.
Ceresit CT 14 or CT 17 should be used for reinforcing the surface of the absorptive substrates and renderings inside and outside the buildings. It is recommended for priming the armoured layers within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) and traditional plasters. The paint CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Priming the substrate with the paint CT 16 considerably decreases its absorption, which prevents from too fast drying of the applied products. The fi ne aggregates included in CT 16 make the primed surfaces rough and scratch resistant. As the surface is expanded, it increases the adhesion of the plasters, putties and paints. This product has strong coating properties and makes the substrate effi ciently homogenous, thus preventing from any formation of stains on the coloured acrylic, mineral and silicone plasters. Ceresit CT 14 or CT 17 should be used for reinforcing the surface of the absorptive substrates.
Additional information
Weight | 15 kg |
---|
Related products
-
CT 49 Silix XD® Nano-silicone paint
Highly hydrophobic, vapour permeable paint for buildings’ façades and interiors
Properties
- Slight absorbance
- High vapour permeability
- Self-cleaning (especially resistant to dirt)
- High durability thanks to the Silix XD® formula
- Crack-bridging
- Highly resistant to UV and weather conditions
- Ticsotropic
- For use in areas open for biological contamination (fungi, algae, etc.)
- Available in full palette of Ceresit Colours of Nature®
-
Ceresit CT17 deep penetrating primer – 5L
Manufacturer Ceresit£26.80 inc VAT Add to cart
- consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate)
- it strengthens the surface
- reduces the absorbability of the substrate
- improves adhesion to the ground
- permeable
- makes it easier to apply subsequent layers, eg glues, putties, floors, paints
-
Ceresit CL51 Liquid foil – 5kg
Manufacturer Ceresit£44.86 inc VAT Add to cart
-
- approximate consumption (two layers): approx. 1.1 kg / m²
- waterproof and flexible
- covering scratches
- it does not contain solvents
- fixing tiles after 4 hours
-
-
Ceresit CT85 adhesive for polystyrene and mesh – 25kg
Producer Ceresit approximate consumption: panel fastening: approx. 5.0 kg / m² reinforced layer: approx. 4.0 kg / m² putty layer: approx. 1.0 kg / m² highly impact resistant unique combination of fibers resistant to weather conditions resistant to scratches and cracks highly adhesive to mineral substrates and polystyrene elastized possibility of machine application£21.08 inc VAT Add to cart