call us: 0330-8080-451
0
Ceresit ETICS

External Wall Insulation EWI – CERESIT Ceretherm

external wall insulation ceresit popular

Download

Render colours chart – CERESIT

Download

External Wall Insulation Systems CERESIT

Download

Wall Render Repairs

Download

Advantages of ETICS insulation systems

The main advantages of ETICS thermal insulation systems include:

  • effective increase of the insulating power of insulated walls with the simultaneous elimination of thermal bridges,
  • renewing the appearance of the elevation with the possibility of maintaining the current form or with the possibility of introducing new shapes and forms of finishing,
  • low total weight of insulation, almost indifferent to the building structure, enabling installation on any type of building (a particularly important feature when insulating large-panel buildings),
  • easy processing of thermal insulation material allowing for decorative architectural details, such as rustication, cornices or window and door frames,
  • increasing the value of the building, resulting both from the attractive appearance and the degree of energy consumption of the building,
  • unlimited possibilities of available forms and colours of surface finishing.

Render systems CERESIT Ceretherm

EWI - System CERESIT Ceretherm Aquastatic

1. Fixing

  • Ceresit CT 83 Strong Fix Adhesive EPS or Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations.

2. Insulation material

  • EPS-boards classified as EN 13163, with thickness up to 42 cm

3. Reinforced layer*

  • Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, and Ceresit CT 325 glass fibre mesh

4. Priming paint

5. Plaster

  • Ceresit CT 174, CT 175 Silicate-Silicone Aquastatic, silicate-silicone plasters

6. Paint

* Optionally you can use as an adhesive and rendering mortars Thermouniversal or CT80 covered by ETA documents ETA Ceresit Ceretherm Universal

INSULATES AND RESISTS TO WATERAND HUMIDITY EFFECTS

  • A vapour permeable system, resistant to water uptake, humidity effects and dirt pick-up, supported by Double Dry and Fibre Force technologies.
  • Buildings where more advanced insulation system can better resist to water and humidity effects.

Characteristics:

  • Dirt and water uptake resistant
  • Vapour permeable & hydrophobic
  • Resistant to biological contamination like fungi and algae
  • Flexible and durable
  • Resistant to thermal stresses and cracks
  • Excellent application parameters
  • Certification: ETA Ceresit Ceretherm Classic

EWI - System CERESIT Ceretherm Popular

1. Fixing

  • Ceresit ZS /CT 81 Adhesive Mortar or Ceresit ZU /CT 82 Adhesive and Reinforcing Mortar, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations.

2. Insulation material

  • EPS-boards classified as EN 13163, with thickness up to 42 cm

 3. Reinforced layer

  • Ceresit ZU/CT 82 Adhesive and Reinforcing Mortar and Ceresit CT 325 glass fibre mesh

4. Priming paint

5. Plaster*

6. Paint*

* Alternative Ceresit plasters and paints: Mineral, Silicate-Silicone, Silicone, Silicate, Elastomeric

RELIABLE AND POPULAR THERMAL INSULATION

Reliable and popular thermal insulation system. It is an economic solution that offers proper thermal insulation properties and regular resistance to weather changing conditions.

Buildings where reliable and economic ETICS is needed.

Characteristics:

  • Reliable insulation system
  • Weather & impact resistant
  • Economic solution
  • Resistant to biological contamination like fungi and algae
  • Certification: ETA Ceresit Ceretherm Popular

EWI - System CERESIT Ceretherm Express

1. Fixing

  • Ceresit CT 84 Express PU-Adhesive for EPS-boards, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations.

2. Insulation material

  • EPS-boards classified as EN 13163, with thickness up to 42 cm

3. Reinforced layer*

  • Ceresit CT 87 White Flexible Adhesive and reinforcing mortar for EPS and MW and Ceresit CT 325 glass fibre mesh

4. Priming paint

  • N/A

5. Plaster**

  • Ceresit CT 174, CT 175 Silicate-Silicone Aquastatic, silicate- silicone plasters

6. Paint**

  • Ceresit CT 48 Silicate-Silicone Aquastatic silicate- silicone paint

* Optionally you can use as rendering mortars CT 85, CT 82/ZU covered by ETA documents ETA Ceresit Ceretherm Classic and ETA Ceresit Ceretherm Popular; in this case priming paint CT 16/CT 15 is necessary.
** Alternative Ceresit plasters and paints: Mineral, Acrylic, Silicone, Silicate, Elastomeric.

SUPER FAST AND COVENIENT LIGHT WEIGHT INSULATION

  • Superfast and light weight insulation system – unbeatable solution in all cases where the time of completing an investment plays an important role as well as in ETICS renovations (ETICS on ETICS).
  • Buildings where installation of ETICS system must be completed within a short time; for buildings where lowest weight per m² is important; for thermal renovation of old ETICS facades (ETICS on ETICS).

Characteristics:

  • Super fast 5 days shorter application time vs conventional system
  • Light weight – up to 50% lighter per m² vs conventional system
  • Convenient – less material, less application steps
  • Highest efficiency per m²
  • Extended application conditions from 0°C to 40°C for eps boards fixing
  • Low water uptake and high vopour permeability
  • Resistant to biological contamination like fungi and algae
  • Highly durable & flexible
  • Excellent application
  • Certification ETA Ceresit Ceretherm Premium

EWI - System CERESIT Ceretherm Self Clean

1. Fixing

  • Ceresit CT 83 Strong Fix Adhesive Mortar or Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations.

2. Insulation material

  • EPS-boards classified as EN 13163, with thickness up to 42 cm

3. Reinforced layer*

  • Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, and Ceresit CT 325 glass fibre mesh

4. Priming paint

5. Plaster

6. Paint

  • Ceresit CT 48 Silicone Self Clean, silicone paint
    Ceresit CT 49 Nanosilicone Reno, nanosilicone paint

* Optionally you can use as an adhesive and rendering mortars Thermouniversal or CT80 covered by ETA documents ETA Ceresit Ceretherm Universal

Characteristics:

  • Self cleaning
  • Dirt and water uptake resistant
  • Vapour permeable & hydrophobic
  • Resistant to aggressive dirts
  • Highly resistant to biological contamination like fungi and algae
  • Highly flexible & durable
  • Resistant to thermal stresses and cracks
  • Excellent application parameters
  • Certification: ETA Ceresit Ceretherm Classic

INSULATES AND KEEPS FACADEDRY AND CLEAN

Advanced insulation system with self-cleaning properties, vapour permeable and highly resistant to water uptake and aggressive dirt.

Buildings where more advanced insulation system can better resist to water, dirt pick up and make facade dry and clean for longer.

EWI - System CERESIT Ceretherm Impactum

1. Fixing

  • Ceresit CT 83 Adhesive Mortar, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations

2. Insulation material

  • EPS-boards classified as EN 13163, with thickness up to 42 cm

 3. Reinforced layer

  • Ceresit CT 100 Impactum One component flexible dispersion reifnorcing compound and Ceresit CT 325 and CT 327 glass fibre meshes

4. Priming paint

  • N/A

5. Plaster**

  • Ceresit CT 79 Elastomeric Impactum elastomeric plaster.

6. Paint**

  • Ceresit CT 55 Elastomeric Impactum elastomeric paint

* Optionally you can use CT81/ZS, CT82/ZU, CT 80 or CT 85

** Alternative Ceresit plasters and paints: Acrylic, Silicate-Silicone, Silicone, Silicate

ULTIMATE DURABILITY AND PROTECTION AGAINTS ANY IMPACTS

  • Buildings located where the risk of mechanical impacts is high (next to schools, playgrounds, sport objects). In all cases where system’s and facade durability is the key decision criteria for choosing ETICS system; for facades in dark, deep colours
  • Ultimate durability and protection against any impacts – insulation system with exceptional flexibility, strength and impressive mechanical impact resistance to 100J. Super resistant to thermal stresses, cracks or extreme weather conditions.

Characteristics:

  • Highest impact resistance up to 100J mechanical impacts – class I exceeded 10 times
  • High resistance to hail
  • Highest flexibility
  • High resistance to thermal stresses and cracks
  • Extended coloristics options to very dark and intense colours (HBW ≥5%)
  • Highest resistance to water uptake
  • Ultimate performance and durability
  • Excellent application parameters
  • Certification ETA Ceresit Ceretherm Impactum