Description
A cleaner for removing dirt from non-hardened polyurethane foam and for cleaning guns – foam dispensing applicators.
Ceresit PU Profi Cleaner is used for:
removal of uncured polyurethane foam,
removing dirt from the inside of the gun (only possible with non-hardened foam),
cleaning the gun housing and barrel from the remains of fresh foam,
degreasing surfaces during substrate preparation before using polyurethanes and silicones
Ceresit PU Profi Cleaner is not suitable for removing hardened foam. The cleaning agent can damage painted or painted surfaces, fabrics or plastic. Avoid spraying on clean surfaces. Strong solvent!
Related products
-
Ceresit CT17 deep penetrating primer – 5L
Manufacturer Ceresit£26.80 inc VAT Add to cart
- consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate)
- it strengthens the surface
- reduces the absorbability of the substrate
- improves adhesion to the ground
- permeable
- makes it easier to apply subsequent layers, eg glues, putties, floors, paints
-
Ceresit CT87 universal adhesive for insulation “2in1” WHITE – 25kg
Producer Ceresit approximate consumption: panel fastening: approx. 4.0 kg / m² reinforced layer: approx. 3.0 kg / m² putty layer: approx. 1.0 kg / m² 2 in 1 - does not require priming before applying plaster significantly lower consumption high adhesion to mineral substrates as well as polystyrene and wool breathable elastized reinforced with fibers resistant to scratches and cracks resistant to weather conditions possibility of machine application£32.30 inc VAT Add to cart -
Ceresit CT137 mineral render DOT 1.5mm – WHITE – 25kg
Manufacturer Ceresit£36.95 inc VAT Add to cart
- white colour
- approximate consumption of about 2.0 - 2.4 kg/m²
- breathable
- resistant to atmospheric conditions
- naturally resistant to the growth of fungi, algae and mold
- good adhesion
- possibility of machine application
-
Ceresit CT84 Express polyurethane adhesive for EPS – 850ml
Producer Ceresit packaging efficiency: in insulation systems around 10 m2 for foundation insulation around 14 m2 15% higher adhesive strength than traditional cement adhesives low-pressure pinning after just 2 hours operation from 0 ° C and at high humidity ideal for use in the case of "warming for insulation" increased thermal insulation properties - it has thermal insulation properties similar to insulation materials such as polystyrene or wool high homogeneity of the adhesive due to the use of a metal ball£21.95 inc VAT Add to cart
