WIM SUPERFLEX S1 highly flexible adhesive for tiles – 25kg
£25.33 inc VAT
WIM manufacturer
on deformable substrates (class S1)
very high flexibility
with increased grip
for terraces, balconies and facades
for large format tiles
for sticking “plate to plate”
for underfloor heating
the possibility of gluing tiles “from above”
for OSB
on plasterboard
layer thickness up to 10 mm
frostproof, waterproof
Description
DEFORMABLE HIGH FLEXIBLE ADHESIVE MORTAR WITH VERY HIGH PARAMETERS
Deformable, highly elastic adhesive mortar for fixing ceramic, porcelain and clinker tiles of any format and absorbability, exposed to extremely difficult conditions of use and deformation, indoors and outdoors. It can be used for gluing tiles on difficult substrates such as plasterboard walls, OSB boards, old tiles, terrazzo, floors with underfloor heating, properly made and dried waterproofing coatings in shower cabins and especially on terraces, balconies and swimming pools. It is also suitable for laying natural stone, insensitive to moisture and discoloration.
Side tile Tooth height Consumption (kg / m²)
up to 10 cm 4 mm 1.6-2.0
20-25 cm 6-8 mm 3.0-4.0
over 30 cm 8-12 mm 4.0-6.0
Related products
-
ATLAS GEOFLEX tiles adhesive 25kg
£19.55 inc VAT Add to carthighly flexible gel adhesive 2-15 mm (C2TE type)
The use of siliceous gel technology gives the advantages:• possibility of fixing cladding of any type, both absorbable and non-absorbable,• possibility of optimum adaptation of the adhesive consistency to individual contractor’s preferences and actual needs resulting from particular use, by dosing water within a range much wider than in case of traditional adhesives,• full adhesive spreading beneath the tiles, which improves adhesion and bond durability, particularly in case of outdoor use,• safe cladding fixing on substrates exposed to direct sunshine, both during tiling and the adhesive setting (e.g. on balconies, terraces, etc.). -
-
Cekol DL-80 deep penetrating primer – 10kg
Manufacturer Cekol£35.16 inc VAT Add to cart
-
- coverage: 1 litr for about 5 ÷ 15 m² (depending on the degree of absorbability of the substrate may change significantly)
-
-
