Ceresit CT87 universal adhesive for insulation “2in1” WHITE – 25kg
£32.30 inc VAT
Producer Ceresit
approximate consumption:
panel fastening: approx. 4.0 kg / m²
reinforced layer: approx. 3.0 kg / m²
putty layer: approx. 1.0 kg / m²
2 in 1 – does not require priming before applying plaster
significantly lower consumption
high adhesion to mineral substrates as well as polystyrene and wool
breathable
elastized
reinforced with fibers
resistant to scratches and cracks
resistant to weather conditions
possibility of machine application
Description
For fixing foamed polystyrene and mineral wool panels and for making a thin layer reinforced with mesh when insulating buildings using the light-wet method.
Ceresit CT 87 mortar is used for insulating external walls of buildings by the light-wet method with the use of foamed polystyrene boards or facade panels made of mineral wool. It is a component of jointless insulation systems for external walls of Ceresit Ceretherm buildings. CT 87 mortar is used to make a protective reinforced layer when insulating newly erected buildings as well as those undergoing thermorenovation, and to fix facade thermal insulation boards. Ceresit CT 87 is additionally reinforced with fibers, and thus even more resistant to scratches and cracks. The use of CT 87 (color, surface and organic modifiers) allows to skip the process of preparing its surface by priming with primers before applying any Ceresit plasters. The content of special light fillers gives the mortar a more plastic, light and homogeneous consistency, it is easier to mix, apply and spread, while increasing the mortar efficiency.
Additional information
Weight | 25 kg |
---|
Related products
-
Ceresit CT137 mineral render DOT 1.5mm – WHITE – 25kg
Manufacturer Ceresit£32.98 inc VAT Add to cart
- white colour
- approximate consumption of about 2.0 - 2.4 kg/m²
- breathable
- resistant to atmospheric conditions
- naturally resistant to the growth of fungi, algae and mold
- good adhesion
- possibility of machine application
-
Ceresit CT84 Express polyurethane adhesive for EPS – 850ml
Producer Ceresit packaging efficiency: in insulation systems around 10 m2 for foundation insulation around 14 m2 15% higher adhesive strength than traditional cement adhesives low-pressure pinning after just 2 hours operation from 0 ° C and at high humidity ideal for use in the case of "warming for insulation" increased thermal insulation properties - it has thermal insulation properties similar to insulation materials such as polystyrene or wool high homogeneity of the adhesive due to the use of a metal ball£21.95 inc VAT Add to cart -
Ceresit CT17 deep penetrating primer – 5L
Manufacturer Ceresit£26.80 inc VAT Add to cart
- consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate)
- it strengthens the surface
- reduces the absorbability of the substrate
- improves adhesion to the ground
- permeable
- makes it easier to apply subsequent layers, eg glues, putties, floors, paints
-
Ceresit CS7 acrylic sealant – 280ml
Manufacturer Ceresit£5.00 inc VAT Add to cart
-
- ideal adhesion to porous substrates
- permanently elastic-plastic
- painted
- waterproof
- resistant to aging
-