BP1S – PVC dripnose starter bead with mesh
£7.28 inc VAT
or making a connection of the aluminium starter strip with plaster in an insulation facade.
Description
– Allows for making solid, break-resistant connections of the aluminium starter strip with structural plaster surface
– The bead is additionally provided with a drip draining water from the lower edge of the façade
– BP1S bead eliminates the effect of plaster falling off from the starter strip on the strip-plaster connection
Assembly: BP1S PVC dripnose starter beads with mesh should be installed on aluminium starter strips in the insulation façade. The installation of the BP1S bead is done by mechanical slipping it from the top onto the vertical edge of the starter strip. Then, in a single gluing operation, cover the fibreglass mesh mounted on the BP1S bead with the façade fibreglass mesh. The BP1S bead has a bottom edge adapted for zinc plating and keeping (closing) the plaster without the risk of spatter on the lower edge of the plaster.
Additional information
| długość: | 2.5m |
|---|
Related products
-
-
Ceresit CT17 deep penetrating primer – 10L
Manufacturer Ceresit£48.36 inc VAT Add to cart
- consumption: from 0.1 to 0.5 l / m² (depending on the equality and absorbability of the substrate)
- it strengthens the surface
- reduces the absorbability of the substrate
- improves adhesion to the ground
- permeable
- makes it easier to apply subsequent layers, eg glues, putties, floors, paints
-
-
Cekol DL-80 deep penetrating primer – 5kg
Manufacturer Cekol£20.81 inc VAT Add to cart
-
- coverage: 1 litr for about 5 ÷ 15 m² (depending on the degree of absorbability of the substrate may change significantly)
-
