Cekol DL-80 deep penetrating primer – 5kg
£20.81 inc VAT
Manufacturer Cekol
-
- coverage: 1 litr for about 5 ÷ 15 m² (depending on the degree of absorbability of the substrate may change significantly)
Description
CEKOL DL-80 is a water-borne, solvent-free, deeply penetrating emulsion used for priming absorbable gypsum, concrete and brick substrates under putty, leveling with self-leveling mortars, gluing ceramic tiles. Can be used inside and outside buildings. The CEKOL DL-80 emulsion can be used to protect plaster surfaces against moisture and weather conditions.
CEKOL DL-80 emulsion is non-toxic and non-flammable. Does not contain organic solvents. Strengthens substrates, seals them, increases adhesion of putty and adhesive mortars to the substrate
and spout. Prevents harmful chemical reactions between gypsum and cement. With self-leveling screeds, it prevents the water from absorbing too quickly through the subfloor, improving flowability and reducing bubble formation. CEKOL DL-80 improves evenness in the application of mortars when plastering and leveling. Priming the plaster surface makes painting easier. After drying, a transparent, slightly shiny coating is formed on the surface, resistant to water and alkaline factors, which does not inhibit the exchange of water vapor and gases with the environment.
Additional information
| Weight | 5 kg |
|---|
Brand
Cekol
Related products
-
CEKOL BD-10 ARCHITECTURAL CONCRETE
£73.15 inc VAT Add to cart- RAW CONCRETE EFFECT
- EASY TO PERFORM
- FOR DRY AND DAMP ROOMS
- POSSIBILITY OF DYEING IN THE MASS
-
Cekol WG-50 non-shrink self-levelling screed – 20kg
Producent Cekol£23.80 inc VAT Add to cart
GIPSOWA MASA SAMOPOZIOMUJĄCA-
- bezskurczowa
-
- ruch pieszy już po 6 h
-
- do wyrównywania podłoży
-
- pod parkiety i panele
-
- pod wykładziny tekstylne i PVC
-
- pod płytki ceramiczne i kamień naturalny (układanie po 24 godzinach)
-
- na powierzcnie typowe i ogrzewane
-
-
ATLAS CERPLAST – priming mass for renders – 25kg
The main characteristics• ensures ideal adhesion of the render • reduces absorbability and strengthens the substrate • facilitates render application and texture forming • unifies the substrate colour • available in several coloursThe main parameters• consumption: ca. 0,3 kg / m² • adhesion: > 1.0 MPa • drying time: 4 ÷ 6 h£82.76 inc VAT Add to cart
